Search
DAB Series Desuperheater
The DAB Series desuperheater is designed with the purpose of efficiently reducing the steam temperature up to the required one. The DAB Series desuperheater is also part of a steam line, including a distribution system (pipes) with nozzles connected to it. These nozzles are strategically positioned to obtain an ideal mixture and a rapid vaporization of the cooling water. The inlet of cooling water is controlled by a control valve.
Labels.MediaLibrary
BC1100 Controller
The Spirax Sarco BC1100 controller is part of an integrated range of boiler house equipment, designed for DIN rail or chassis mounting. The controller is used in conjunction with a Spirax Sarco conductivity sensor and blowdown valve to monitor and control the concentration of total dissolved solids (TDS) in steam boilers.
Labels.MediaLibrary
4" PPF-P Pilot Operated Pressure Powered Pump
The 4" PPF-P incorporates a spring-loaded, float-operated mechanism to activate a piloted double valve arrangement. This will alternatively pressurize and vent the pump body with motive gas, usually steam, to achieve pumping. The internal mechanism serves only to operate the pilot valve.
Labels.MediaLibrary
PN9000 Series Pneumatic Actuators
The PN9000 series actuators are a compact range of linear actuators that are available in four sizes. This range of actuators comprise of four diaphragm sizes for matching the requirements of valves at various differential pressures. Each actuator has a mechanical travel indicator fitted and incorporates a fully-rolling diaphragm, except size 4, which provides good linearity over the operating stroke.
Labels.MediaLibrary
Cast Iron Float and Thermostatic Steam Traps FT-150, FT-200
The trap contains a float valve mechanism which modulates to discharge condensate continuously at steam temperature, while non-condensible gases are released by a separate internal balanced pressure thermostatic air vent.
Labels.MediaLibrary
Acoustic Plates
The Spirax Sarco model AP Acoustic Plate is designed to graduate the expansion across a valve, and therefore reduce valve noise. The acoustic plate absorbs the impact of the vent pressure at the downstream side of the valve.
Labels.MediaLibrary
UFT32 Series Sealed Stainless Steel Float & Thermostatic Steam Trap (for use with Universal Connectors)
The UFT Series of Traps is an austenitic stainless steel maintenance free sealed ball float steam trap with an integral automatic air venting capability. The UFT is designed for differential steam pressures up to 465 psi g.
Labels.MediaLibrary
Direct Operated Pressure Regulator 25MP
The 25MP is a direct acting steam pressure reducing valve. Downstream pressure is fed back through an external sensing line.
Labels.MediaLibrary
STS17.2 Steam Trapping Station
The STS17.2 steam trap station has been designed to provide a convenient 'ready-to-install' trapping solution which has an upstream isolation valve, a universal connector with strainer, a check valve and a downstream isolation valve.
Labels.MediaLibrary
EP6 Electro-pneumatic Positioner
The EP6 is a 2 wire loop powered positioner requiring a 4-20 mA control signal, and is designed for use with linear and rotary pneumatic valve actuators. The positioner compares the electrical signal from a controller with the actual valve position and varies a pneumatic output signal to the actuator accordingly.