Search
EP6 Electro-pneumatic Positioner
The EP6 is a 2 wire loop powered positioner requiring a 4-20 mA control signal, and is designed for use with linear and rotary pneumatic valve actuators. The positioner compares the electrical signal from a controller with the actual valve position and varies a pneumatic output signal to the actuator accordingly.
Media Library
Float Operated Liquid Drain Traps Types FA, FAI, FAB, CA
Spirax Sarco Float Operated Liquid Drain Traps have a spherical stainless steel float which continuously adjusts the valve opening so that liquid is discharged at same rate as it enters the trap. The liquid level in the Drain Trap body is always above the valve seat, sealing the valve from gas leakage.
Media Library
Electric Pilot Operated On/Off Regulator 6" 25E
The 25E is controlled by an electric pilot valve. The main valve opens wide when the pilot is energized; it closes when the pilot is de-energized. The 25E does not modulate or throttle steam at part load. This valve meets Class IV shut-off specifications but is not suitable for deadend service.
Media Library
AEL7 Series Electric Linear Actuator
The AEL7 Series linear electric actuators are a cost effective heavy duty range of linear electric actuators only suitable for the modulation of Spirax Sarco Group valves. The AEL7 Series actuators must not be used for any other purpose.
Media Library
UBP32 Sealed Balanced Pressure Thermostatic Steam Trap for use with Pipeline Connectors
The UBP32 is a maintenance free sealed balanced pressure steam trap manufactured in stainless steel - It can also be supplied with an inbuilt check valve designated UBP32CV.
Media Library
AEL8 Series Electric linear actuators
The AEL8 series electric linear actuators are only suitable for the use on Spirax Sarco group valves.
Media Library
PN9000 Series Pneumatic Actuators
The PN9000 series actuators are a compact range of linear actuators that are available in four sizes. This range of actuators comprise of four diaphragm sizes for matching the requirements of valves at various differential pressures. Each actuator has a mechanical travel indicator fitted and incorporates a fully-rolling diaphragm, except size 4, which provides good linearity over the operating stroke.
Media Library
STS17.2 Steam Trapping Station
The STS17.2 steam trap station has been designed to provide a convenient 'ready-to-install' trapping solution which has an upstream isolation valve, a universal connector with strainer, a check valve and a downstream isolation valve.
Media Library
UFT32 Series Sealed Stainless Steel Float & Thermostatic Steam Trap (for use with Universal Connectors)
The UFT Series of Traps is an austenitic stainless steel maintenance free sealed ball float steam trap with an integral automatic air venting capability. The UFT is designed for differential steam pressures up to 465 psi g.
Media Library
4" PPF-P Pilot Operated Pressure Powered Pump
The 4" PPF-P incorporates a spring-loaded, float-operated mechanism to activate a piloted double valve arrangement. This will alternatively pressurize and vent the pump body with motive gas, usually steam, to achieve pumping. The internal mechanism serves only to operate the pilot valve.