A range of compact linear actuators having 4 diaphragm sizes for matching the requirements of different valves at various differential pressures. Each actuator is fitted with mechanical stroke indicators and incorporate a rolling diaphragm to give linearity over the full operating stroke.
Spirax Sarco acoustic plates are designed to be bolted between conventional ANSI class 150 or 300 piped flanges on the downstream side of a regulator or control valve usually between flanged pipe reducers.
PP Series is a linear pneumatic piston type actuator that provides positive throttling or on-off operation for automatic control valves. The cylinders are designed for instrument air supply pressures of up to. 100 psi. This actuator can be single or double-acting and spring-return. This actuator is fully fi eld reversible for air-to-open or air-to-close action.
The STS17.2 compact pipeline connector steam trapping station has been designed to provide a convenient ready to install trapping solution, which includes: upstream and downstream isolation valves, body incorporating quickfit connector + strainer and check valve blanking plug.
Normal positions before startup are with the main valve and electric pilot closed, pressure pilot open, and temperature pilot open.
A range of self-powered control systems that incorporate sensor, actuator, set point adjustment / indicator for use with 2- port and 3-port control valves.
Installation and Maintenance Instructions
The Stonel Limit Switch is for use with the K Series pneumatic control valves and PN5000/6000 actuators. It is mounted on the PN5000/6000 actuators and can provide visual indication if the valve is fully open, fully closed, partially open (0-100%) or partially closed (0-100%). By comparing flow rates over time with your valve position, you can determine valve wear.
The trap contains a float valve mechanism which modulates to discharge condensate continuously at steam temperature. Noncondensible gases are released by a separate internal balanced pressure thermostatic air vent.
The 6A Air Vent has both a float and a thermostatic bellows for use where air, condensate and steam may be present (as in one pipe steam heating systems.) The 6A will discharge air, while preventing the escape of either condensate or steam. An outlet check valve prevents the re-entry of air.