Search
Trap Diffuser DF1, DF3 and Three Way Test Valve
The DF Series Trap Diffuser is a compact unit designed to be fitted to the outlet of a steam or liquid drain trap. The DF Diffuser reduces noise and erosion by cushioning high velocity discharge.
Media Library
DM Type Solenoid Valves for use with Piston Actuated Valves
A 3-port two way electropneumatic pilot solenoid valve that can be directly mounted (banjo connection) to the PF51G and PF61G-NC, NO and BD series piston actuated valves. Suitable for air or water operating media. The valve is supplied with a DIN connector and fitted with manual override as standard.
Media Library
CA46 and CA46S Austenitic Stainless Steel Air and Gas Traps Flanged DN15 (½") to DN25 (1")
The CA46 is an austenitic stainless steel ball float air and gas trap. It is available with a soft valve cone given designation CA46 or with a metal valve cone given designation CA46S both having horizontal flanged connections. The cover will be drilled and tapped ½" BSP or NPT for the purpose of fitting a balance line. Body and cover castings are produced by a TÜV approved foundry.
Media Library
PV4 and PV6 Piston Valves
The PV4 and PV6 are piston isolation valves that have been designed for use on steam, condensate and other liquid sytems.
Media Library
Safety Valves SV74 Series
The SV74 Series valves are built in conformance to Section I and VIII of the ASME boiler and pressure vessel code. They are primarily intended for use on power boilers and unfired pressure vessels where ASME Section I or VIII stamped valves are required.
Media Library
BRV71 and BRV73 Pressure Reducing Valves
The BRV7 is a robust direct acting pressure reducing valve designed for use on steam, air and inert industrial type gases. The valve is available in four nominal sizes; DN25, DN32, DN40 and DN50, and is constructed in SG iron with stainless steel internals.
Media Library
Replacement of Pivotrol (Patented) Motive Inlet Valve
Replacement instructions for Pivotrol (Patented) Motive Inlet Valve
Media Library
Safeguard Overheat Protection for 2 and 3 Port Temperature Control Valves
The Safeguard Overheat Protection system consists of the HL10 high limit cutout with a 130 control system. The valve is installed upstream of a heating control valve or in parallel with a cooling control valve to provide secondary overheat protection. If the temperature at the sensor exceeds the setting, the HL10 cutout is activated to close a normally open valve or open a normally closed valve.
Media Library
Belimo SVK Series Electric Actuator with UGVL Linkage Kit for ½" to 2" B Series and Spira-trol Control Valves
The Belimo SVK series actuator is suitable for either On/Off or modulating/proportional globe valve control. It provides control in response to an input from an electronic controller with an adjustable reversing switch and manual override located on the cover.
Media Library
BRV71 and BRV73 SG Iron Pressure Reducing Valves
The BRV71 (screwed) and BRV73 (flanged) are SG iron bodied direct acting pressure reducing valves designed for applications using steam.