Indicatori SGC40 in acciaio e SGS40 in inox, filettati, a saldare, a clamp e flangiati EN PN40 o ASME300

L'SGC40 e l'SGS40 sono indicatori di passaggio a doppio vetro con corpo rispettivamente in acciaio al carbonio ed acciaio inox da fusione. Sono disponibili con attacchi flangiati, filettati, a tasca a saldare e a clamp sanitario.

4000 Series pneumatic recorders and controllers

The series 4000 instruments are available in a wide range of versions with different functions: Recorders for one or two variables; single or double recorders with one controlled variable; indicating controller for single variable. Indication is done on a segmental graduated scale 120mm wide, while the recording is performed on a completely visible circular chart with a diameter of 185mm and effective recording width of 75mm. Scale and recording chart are available, with a wide choice of measurement ranges and graduations in both actual and percentage units.

Manual Loading Station Type 354

Type 354 manual loading station is used for remotely positioning pneumatic control valves or other control elements and for remote pneumatic adjustment of the set point of automatic controllers. It consists of a non-bleed high accuracy pressure regulator having a very stable output signal and provided with an adjusting knob. A 2" dial pressure gauge indicates the output pressure.

LSC1 Immersion thermometer ISPESL type approved

The LSC1 thermostat, with positive safety action, is used for limiting the temperature of water in heat generators. It is a two-position thermostat, comprising a sensitive probe and a trip mechanism connected by an internal capillary. The liquid-charged sensitive element is provided with positive safety action (breaks an electric circuit when the pre-set temperature is reached, as well as in the event of a fault due to accidental loss of thermometric liquid). The sensor is protected by a PN10 copper pocket, suitable for temperatures up to 125°C and provided with a ½” NPT threaded connection.

Convertitori corrente-pressione ITV1030 con uscite fino a 5 bar

I convertitori elettro pneumatici serie ITV1030 sono strumenti previsti per trasformare un segnale standard di corrente continua in un segnale pneumatico proporzionale all'elettrico in ingresso e trovano la loro maggiore applicazione nel collegamento tra strumentazione elettronica e strumenti pneumatici ed alla fine di una catena di regolazione elettropneumatica, quando strumenti elettronici siano asserviti ad organi di controllo e servomotori pneumatici.

Guida per l’avvio rapido Posizionatore EP6

L’EP6 è un posizionatore elettropneumatico che controlla accuratamente la corsa della valvola in risposta a un segnale in ingresso di 4-20mA dal controller.

SP500 Electropneumatic Smart Positioner