Tanques y recipientes a presión

Calentamiento autoaccionado de un tanque por inyección de vapor (con bridas)

Instalación recomendada para un tanque con control de temperatura autoaccionado de inyección de vapor.

Calentamiento autoaccionado de un tanque por inyección de vapor (con bridas)
 

Component Descriptions

Part Component Function
1 Isolating Valve to isolate the installation from the steam supply
2 Strainer to protect the control valve from detritus
3 Control Valve to regulate the steam flow to the injector
4 Check Valve to prevent water from the tank backsyphoning
5 Self-acting Controller to adjust the control valve relative to the water temperature
6 Temperature Sensor to sense the tank water temperature
7 Steam Injector to efficiently inject steam into the tank water
8 Isolating Valve  
Arrow Top
 

Table of Parts

Part   Component Bronze Cast iron SG iron Steel Stainless steel Product details
1 Isolating Valve Bellows Sealed Type   BSA1 BSA2 BSA3   Bellows Sealed Stop Valves
Ball Type       M20 M20 Ball Valves
2 Strainer Fig 3 Fig 33 Fig 37 Fig 34 Fig 36 Strainers & Filters
3 Control Valve KX51 KA33, KB33 or KC31   KA43, KB43 or KC43   Control Valves
4 Check Valve as Vacuum Breaker DCV1       DCV2, 3 or 4 Check Valves
5 Self-acting Control Type SA122 sensor and actuator Self-acting Controls
6 Sensor Pocket Brass / Copper sensor pocket  
6 Steam Injector IN series steam injector Steam Injectors
8 Isolating Valve       M10 M10 Ball Valves
Arrow Top

¿Qué puedo hacer ahora?

Spirax Sarco tiene ingenieros experimentados disponibles para ofrecer consejos en las siguientes aplicaciones:

  • Permitanos que le ayudemos a dimensionar y seleccionar estos productos

  • Concierte una visita de Spirax Sarco a su planta

  • Preguntenos sobre esta aplicación