Contamination Control

Condensate Contamination Detection System

Dumping contaminated condensate to waste automatically.

Condensate Contamination Detection System
 

Component Descriptions

Part Component Function
1 Controller to control the operation of the TDS control valve
2 Actuator to drive the control valve
3 Check Valve to provide enough resistance for flow through the sensor
4 TDS Control Valve to regulate the flow of the blowdown water
5 Isolating Valve to isolate the TDS control system from the blowdown line
6 Isolating Valve to isolate the TDS control system from the blowdown line
7 Conductivity Sensor to monitor the conductivity of the boiler water
8 Drain Valve to drain the sensor circuit for maintenance purposes
Arrow Top
 

Table of Parts

Part Component Spirax Sarco Reference Product details
1 Controller BC3200 TDS Blowdown Controls
2 Actuator EL5600 Series Electric Actuator Electric Actuators
3 Check Valve DCV1, DCV2 or DCV3 Wafer Check Valve Check Valves
4 TDS Control Valve QL33D, QL43D, QL63D, QL73D Three Port Valve Control Valves (See QLM & QLD Three Port Control Valves)
5, 6, 8, 9 Isolating Valve M10 Ball Valve Ball Valves
7 Conductivity Sensor S20 Sensor Chamber with CP10 Conductivity and TP20 Temperature Sensors TDS Blowdown Controls
Arrow Top

Hvad gør jeg nu?

Spirax Sarco have experienced engineers available to offer advice on these applications:

  • Let us help you size and select these products

  • Få en aftale med Spirax Sarco om et besøg på dit anlæg

  • Ask us a question about this application